| |
|
Winterland Accessories
Winterland
has been building and installing decor for twenty years. It doesn't
matter if you need to mount Santa and his reindeer on the roof, attach an
80' tree to the side of a 20 story building or build an animated light
tunnel for 18 wheelers to drive through, we've done it.
Below is just a small sample of the available accessories. Click a
link and you will be taken to our on-line store for more details and pricing
information. You can also call us at
1-800-788-9627 or send an email to
sales@winterlandinc.com to find even more information.
 |
2 Channel
light controller, chase with speed control dial, 150
watts/channel, indoor/outdoor A heavy duty two channel simple chase sequencer brings life to
your lighted animation. Each channel can handle 150 watts.
2-1/2" wide, 3-3/4" high and 1" deep. Non-grounded unit. UL
approved. 120VAC, 60 HZ use only. Indoor and outdoor use.
|
 |
3 channel
light controller, 8 function, 150 watts/channel, indoor/outdoor
A heavy duty three channel sequencer brings life to your lighted
animation. Each channel can handle 150 watts. Eight sequences
are built into this weatherproof unit. Combination, waves,
sequential, slo-glo, chasing/flashing, slow fade, twinkle/flash
and steady on. One button on the front of the unit changes the
sequence that is running. Recycle the power to the unit and it
remembers which sequence was last running. 2-1/2" wide, 3-3/4"
high and 1" deep. Non-grounded unit. UL approved. 120VAC, 60 HZ
use only. Indoor and outdoor use.
|
 |
3 Channel
light controller, chase with speed control dial, 150
watts/channel, indoor/outdoor A heavy duty three channel simple chase sequencer brings life to
your lighted animation. Chase speed is determined by adjusting
simple rotary knob on the front of the unit. Handle 150 watts
per channel. 2-1/2" wide, 3-3/4" high and 1" deep. Non-grounded
unit. UL approved. 120VAC, 60 HZ use only. Indoor and outdoor
use.
|
 |
4 channel
light controller, 8 function, 150 watts/channel, indoor/outdoor
A heavy duty four channel sequencer brings life to your lighted
animation. Each channel can handle 150 watts. Eight sequences
are built into this weatherproof unit. Combination, waves,
sequential, slo-glo, chasing/flashing, slow fade, twinkle/flash
and steady on. One button on the front of the unit changes the
sequence that is running. Recycle the power to the unit and it
remembers which sequence was last running. 2-1/2" wide, 3-3/4"
high and 1" deep. Non-grounded unit. UL approved. 120VAC, 60 HZ
use only. Indoor and outdoor use.
|
 |
4 Channel
light controller, chase with speed control dial, 150
watts/channel, indoor/outdoor A heavy duty four channel simple chase sequencer brings life to
your lighted animation. Each channel can handle 150 watts.
2-1/2" wide, 3-3/4" high and 1" deep. Non-grounded unit. UL
approved. 120VAC, 60 HZ use only. Indoor and outdoor use.
|
 |
All in One
Clip All in one Clips are one of the most popular items. They are
used for C-7 Lamps, C-9 Lamps, and Mini Lights. The clip works
for both standard Incandescents and LEDs. Come in bags of 1,000
or can be
bought individually.
Indoor / Outdoor use.
|
 |
Blue
Connector
3M
Weatherproof Self stripping electrical tap connector - 100 to a
box. Indoor / Outdoor use.
|
 |
C Clip - Case
1000
C Clips are
used for C-7 Lamps and C-9 Lamps on shingles or for perimeter
lighting. The clip works for both standard Incandescent and
LEDs. Come in bags of 1,000 or you are able to buy individual
clips. Indoor / Outdoor use.
|

 |
Rubber 'O'
ring, 200/bag
Provide an extra layer of weather protection by using our
rubber-O rings to keep moisture out of your light sockets. White
in color for C7 bulbs. Typically placed over the male end of the
bulb and then the bulb is screwed into the socket. Sold 200/polybag. They are
old either green or white and fit either a C7 or a C9.
|
 |
C7, socket,
E12 size, non-removable, 50/bag
Replaceable
E12 socket (for C7 bulbs). For 18 gauge zip cord type wire.
White. Sold 50/polybag. Comes in
either green or white.
|
 |
Pro-twist
removable, black, 50/bag.
Field replaceable sockets (for C7, C9 or E26 type bulbs). Black
backlight material for durability. Easy on the fingers twist-on
bottoms. We recommend using our AVM 14 gauge twisted pair wire.
Sold 50/polybag. Sizes
available are C7 socket (E12 size), C9 socket (E17 size), or
Standard socket (E26 size)
|
 |
C7, socket
cord set, E12 sockets, green wire, 1,000 feet
Our commercial grade stringers are perfect for building
exteriors, large trees or custom sculptures. Create custom
string lengths that come with these 1000 foot bulk reels. 18
gauge, SPT-1, green wire. C7 (E12) green sockets spacing lengths
are 3” apart, 6” apart, 7.5” apart, or 12" apart.
|
|
C7, socket
cord set, E12 sockets, white wire, 1,000 feet
Our commercial grade stringers are perfect for building
exteriors, large trees or custom sculptures. Create custom
string lengths that come with these 1000 foot bulk reels. 18
gauge, SPT-1, green wire. C7 (E12) green sockets spacing lengths
are 6” apart, 7.5” apart, or 12" apart.
|
 |
C9, socket,
E17 size, non-removable, 50/bag
Replaceable
E17 socket (for C9 bulbs). For 18 gauge zip cord type wire.
Green or white . Sold 50/polybag.
|
 |
C9, socket cord set, E17 sockets, green wire, 1,000 feet
Our commercial grade stringers are perfect for building
exteriors, large trees or custom sculptures. Create custom
string lengths that come with these 1000 foot bulk reels. 18
gauge, SPT-1, green wire. C9 (E12) green sockets spaced 12”
apart or 48" apart.
|
 |
C9, socket
cord set, E17 sockets, white wire, 1,000 feet
Our commercial grade stringers are perfect for building
exteriors, large trees or custom sculptures. Create custom
string lengths that come with these 1000 foot bulk reels. 18
gauge, SPT-1, white wire. C9 (E17) white sockets spaced 12"
apart.
|
|
Commercial 8
way tap / Multi tap
Our commercial grade lights use weatherproof coaxial connectors
to connect strings together. In cases where you don't need to
attach strings end-to-end, this eight way tap will allow them to
connect in parallel in a star type pattern. Typically, the
Commercial adaptor power plug is connected to one tap and
Commercial based LED light strings are connected to the other
seven taps. This device will only work with Commercial lights
and Commercial based accessories.
|
|
Commercial
adaptor power plug, green wire, 18 gauge, 12" length
Our commercial grade LED lights require one adaptor power plug
per electrical circuit. 450 watts maximum load per adaptor
(which can work out to a light string about half a mile long.)
This device plugs into a standard 120 VAC wall outlets, takes
the 60 hertz alternating current and routes it through a full
wave bridge to provide conditioned power to the LEDs that makes
them brighter and last longer. The output connector is a
weatherproof Commercial type weatherproof coaxial female
connector. Multiple adaptor plugs are required if you have
multiple power circuits (typical for computerized or animated
displays.) This Commercial adaptor power plug device will only
work with Commercial lights and Commercial based accessories.
|
|
Commercial
drop elbow tap
Our commercial grade lights use weatherproof coaxial connectors
to connect strings together. In cases where you need a simple
right angle turn at a connector, this is the correct device.
Typically, the Commercial adaptor power plug or end of a
Commercial based light string is connected to the inbound tap
and a Commercial based LED light string or Commercial based
accessory is attached to the output. This device will only work
with Commercial lights and Commercial based accessories
|
 |
Commercial
spacer, green wire, 18 gauge, 12' length
Our commercial grade lights use weatherproof coaxial connectors
to connect strings together should you need a space between
them. This 18 gauge green cable is 12 feet long and has a
Commercial male connector at one end and Commercial female
connector at the other. This spacer wire will only work with
Commercial lights and Commercial accessories.
|
 |
Commercial
spacer, green wire, 18 gauge, 20' length.
Our B Series commercial grade lights use weatherproof coaxial
connectors to connect strings together should you need a space
between them. This 18 gauge green cable is 20 feet long and has
a Commercial type male connector at one end and Commercial
female connector at the other. This spacer wire will only work
with Commercial lights and Commercial accessories.
|
 |
Commercial T-
tap
Our commercial grade lights use weatherproof coaxial connectors
to connect strings together. In cases where you don't need to
attach strings end-to-end, this T shaped, three way tap will
allow two strings to be connected in parallel, one straight
through and one off the right angle T-tap. Typically, the
Commercial adaptor power plug is connected to one tap and
Commercial based LED light strings are connected to the other
taps. This device will only work with Commercial lights and
Commercial based accessories
|
 |
Commercial X-
tap
Our commercial grade lights use weatherproof coaxial connectors
to connect strings together. In cases where you don't need to
attach strings end-to-end, this X shaped, four way tap will
allow three strings to be connected in parallel. Typically, the
Commercial adaptor power plug is connected to one tap and
Commercial based LED light strings are connected to the other
taps. This device will only work with Commercial lights and
Commercial based accessories.
|
 |
Commercial Y-
tap
Our commercial grade lights use weatherproof coaxial connectors
to connect strings together. In cases where you don't need to
attach strings end-to-end, this Y shaped, three way tap will
allow two strings to be connected in parallel, Typically, the
Commercial adaptor power plug is connected to one tap and
Commercial based LED light strings are connected to the other
two taps. This device will only work with Commercial lights and
Commercial based accessories
|
 |
Guy Wire
50 Feet of
steel twisted wire
|
 |
Male plug, slide-on, SPT-1
This male plug is an easy and quick solution
to putting a polarized plug on SPT-1 zip cord. Make your own
extension cords with our zip cord using these plugs or use them to
create custom length C7 or C9 based light stringers. Also known in
the industry as vampire plugs, this white male plug simply slips
over the end of a cut cable. Slide on the cover, you've connected
the plug to the wire and you're good to go.
Available in green or white.
|
 |
Receptacle,
female plug, slide-on, SPT-1
This female receptacle is an easy and quick solution to putting
a polarized plug on SPT-1 zip cord. Making your own extension
cords with our zip cord using these plugs or using them to
create custom C7 or C9 based light stringers is a snap. Also
known in the industry as vampire plugs, this white female
receptacle slips over the end of a cut cable. Slide on the
cover, you've connected the receptacle to the wire and you're
good to go.
Available in green or white.
|
 |
Ropelight
Accessory Kit
This kit includes3 plugs on 5' cord, with 3 mid-connectors, 3
end caps, 50 mounting clips, 100 screws, and 20 zip ties. This
kits works on both the LED ropelight as well as on the
Incandescent ropelight. Use Indoor / Outdoor.
|
 |
Shingles Tab
Clip Shingle
Tabs are used for C-7 Lamps and C-9 Lamps on shingles or for
perimeter lighting. The clip works for both standard
Incandescent and LEDs. Come in bags of 1,000 or can be bought
individually. Indoor / Outdoor use.
|
 |
Standard, socket cord set, E26 sockets, black wire, 250 feet, 48"
spacing
|
250 foot bulk reels. 14 gauge, black wire. E26 black
sockets. Sockets spaced 48" apart.
|
|
Perfect for general overhead lighting like Christmas
tree lots.
|
Our
commercial grade stringers are perfect for lighting Christmas
tree lots, building exteriors, large trees or custom sculptures.
Create custom string lengths that come with these 250 foot bulk
reels. 14 gauge black wire. E26 black sockets spaced 48" apart.
|
 |
Electrical
Tape
Each roll
is 3/4 inch X 66 feet. Indoor / Outdoor use. Colors that are
available are black, white, green, blue, red, and yellow
|
 |
Wire Mounts
Four-way
cable-tie mounting base can be mounted using the adhesive
backing or a #4 screw. 100 per bag. Indoor / Outdoor use.
This
product is available in either black or white and comes in the
sizes of 1 1/8”, or ¾"
|
 |
Wire, AVM
twisted, 14 gauge black, 250 feet
Premium quality, outdoor rated 14 gauge, two conductor black
wire. Specifically designed for use with our Pro-Twist sockets
so you can put lights anywhere you want on this cable.
|
 |
Wire, zip
cord, 18 gauge, black SPT-2, 1000 feet.
Standard insulated, two conductor black cord with a rib on one
conductor for polarity indication. 18 AWG SPT-2: 18 gauge
copper. Stranding: 41 strands/ 34 gauge. Insulation Thickness:
0.050?. Insulation Material: PVC. Working Voltage: 300V
AC.
Temperature
Range: 105 degrees C. Size: Nominal
O.D.: 0.104? x 0.260? UL Listed and CSA Approved. Wire only.
Plugs and sockets sold separately.
This
product comes in 1000 foot rolls. The colors that are offered
are Black and White.
|
 |
Wire, zip
cord, 18 gauge, green, SPT-1, 1000 feet
Standard insulated, two conductor green cord with a rib on one
conductor for polarity indication. 18 AWG SPT-1: 18 gauge
copper. Stranding: 41 strands/ 34 gauge. Insulation Thickness:
0.030?. Insulation Material: PVC. Working Voltage: 300V
AC.
Temperature
Range: 105 degrees C. Size: Nominal
O.D.: 0.104? x 0.210? UL Listed and CSA Approved. Wire only.
Plugs and sockets sold separately.
This
product comes in both 1000 foot rolls and 500 foot rolls. The
colors that are offered are Green, Black and White.
|
 |
Zip Ties
Fasten commercial-grade lights to buildings and trees using
these tie wraps. They can be used for C-7 Lamps, C-9 Lamps, and
Mini Lights. The Ties works for both standard Incandescent and
LEDs. They also work on rope lighting installation.
Come in bags of 100. Indoor / Outdoor use.
This
product is offered in 14”, 8” and 4” in both black and clear.
|
| |